JWL Sodablasting Set

JWL Sodablasting Set is ideal for larger tasks. The spear can be placed directly in the sodablasting media, and therefore it isn’t necessary with a container – No need for continuous replenishment.

JWL Sodablasting Set makes it possible separately to adjust the air and soda volume for optimal output.

JWL Sodablasting Set is suitable for hobby as well as professional use.

NB! Requires a compressor with a capacity of at least 5,5 HP / 450l/min

Sodablasting…

145110_02

…Removes paint

Sodablasting is a fast and gentle method of removing paint. Sodablasting does not damage glass, rubber or plastic and due to this fact, sodablasting requires a minimal need for shielding.

145110_04

…Removes corrosion

Sodablasting is a fast and gentle method of removing corrosion – even from hard to reach places.

145110_05

…Removes anti-fouling paint

Sodablasting removes anti-fouling paint from boat without damaging the hull.

145110_06

…Removes varnish

Sodablasting removes varnish from wooden furniture. Sodablasting cleans paint from glass surfaces or window frames without damaging the glass or rubber seals. Sodablasting is gentle and environmentally friendly.

Watch the video

Application

1. Wear protective equipment: respiratory protection, eye protection, ear protection and gloves during blasting.

2. Place the spear directly into the dry sodablasting media. Wet or moist soda can clog the device and cause a malfunction.

3. Connect the Sodablasting Gun to the compressed air line system

4. Press the trigger (A) fully and find the correct flow of soda by adjusting the valve (B)

5. Start with testing the effect by blowing on a less visible part of the work piece.

6. Improve the overall performance by adjusting the pressure and the distance

7. When finished clean off soda dust e.g. with a blowgun or by vacuuming. If you are going to paint your work piece after the blasting, it is a good idea to clean it thoroughly before painting.

145110_13

Sodablasting requires the proper soda…

Soda is not just soda. In order to achieve the desired effect, it is important that the soda have the proper grain size and composition.

JWL “Soda Blasting Media” is soda (Natriumbicarbonat) specially intended for blasting with sodablasters. JWL Soda Blasting Media is available in both 5 L containers and 25 kg bags.

SB2-5l-soda
SB2-25kg-soda

Specifications

Technical Specifications

Working pressure:  6 – 12 Bar (87 – 174 psi)
Air consumption:   minimum 450 l/min at 8 bar
Connection:   1/4” int. thread BSP/NPT
Weight:  ~1,3 kg

Materials

Handle and trigger:   Acetal plastic
Valve:   Acetal plastic
Gaskets / O-rings:   Nitrile
Nozzle: Hard. steel, el.galv.
Spring: Hard. steel, el.galv.

145110_tegning

Variants

 DescriptionArt. No.Download
SB2-145110-000Sodablasting Set for larger tasks. Makes it possible separately to adjust the air and soda volume145110-000Data Sheet
User Guide
SB2-5l-soda-015 litre Soda (NaHCO3) – especially suitable for sodablasting320103-000Safety Data Sheet UK
Safety Data Sheet AUS
Safety Data Sheet E
Safety Data Sheet F
Safety Data Sheet GR
Safety Data Sheet I
Safety Data Sheet NL
Safety Data Sheet N
Safety Data Sheet S
Safety Data Sheet SF
Safety Data Sheet US
SB2-25kg-soda-0125 kg Soda (NaHCO3) – especially suitable for sodablasting320101-000Safety Data Sheet UK
Safety Data Sheet AUS
Safety Data Sheet E
Safety Data Sheet F
Safety Data Sheet GR
Safety Data Sheet I
Safety Data Sheet NL
Safety Data Sheet N
Safety Data Sheet S
Safety Data Sheet SF
Safety Data Sheet US
Replacement nozzle for 145110-000, steel (incl. O-ring)145803
Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text.

Start typing and press Enter to search