JWL Sodablaster 2

Clean or remove without damaging

JWL Sodablaster 2 is an enhancement of JWL’s successful Sodablasting Gun. The nozzle on the Sodablaster 2 is already set for the optimal output and it is possible to change the precision nozzle. A high-performance wide nozzle is available as additional fitting

JWL Sodablaster 2 is equipped with a practical, refillable container (1,2 L).

JWL Sodablasting Gun is suitable for hobby as well as professional use!

NB! Requires a compressor with a capacity of at least 2.5 HP / 180 l/min.

Nozzles

Wide nozzle

A high performance wide nozzle is available as additional fitting (packs of 3). The wide nozzle is excellent for larger tasks.

Please note that the wide nozzle lasts for about 30 minutes.

Precision nozzle

The precision nozzle is also available as additional fitting and is excellent at tasks requiring precision.

The soda squirt is cylindrical.

Sodablasting…

SB2-145154-000_05-car

…Removes paint

Sodablasting is a fast and gentle method of removing paint. Sodablasting does not damage glass, rubber or plastic and due to this fact, sodablasting requires a minimal need for shielding.

SB2-145154-000_06-engine

…Removes corrosion

Sodablasting is a fast and gentle method of removing corrosion – even from hard to reach places.

SB2-145154-000_04-boat

…Removes anti-fouling paint

Sodablasting removes anti-fouling paint from boat without damaging the hull.

SB2-145150-wood

…Removes varnish

Sodablasting removes varnish from wooden furniture. Sodablasting cleans paint from glass surfaces or window frames without damaging the glass or rubber seals. Sodablasting is gentle and environmentally friendly.

Watch the video

APPLICATION

1. Wear protective equipment: respiratory protection, eye protection, ear protection and gloves during blasting.

2. Fill the container with dry sodablasting media (maximum ¾ filled). Wet or moist soda can clog the device and cause a malfunction.

3. Connect the Sodablasting Gun to the compressed air line system

4. Adjust the compressor pressure to the required value

5. Aim the nozzle at the desired place and start the soda blasting media by pressing the trigger down. Start testing the effect by blowing on a less visible part of the work piece.

6. Improve the overall performance by adjusting the pressure and the distance

7. When finished clean off soda dust e.g. with a blowgun or by vacuuming. If you are going to paint your work piece after the blasting, it is a good idea to clean it thoroughly before painting.

SB2 instruction

Sodablasting requires the proper soda…

Soda is not just soda. In order to achieve the desired effect, it is important that the soda have the proper grain size and composition.

JWL “Soda Blasting Media” is soda (Natriumbicarbonat) specially intended for blasting with sodablasters. JWL Soda Blasting Media is available in both 5 L containers and 25 kg bags.

SB2-5l-soda
SB2-25kg-soda

Specifications

Technical Specifications

Working pressure:  6 – 12 Bar (87 – 174 psi)
Air consumption:   minimum 180 l/min at 8 bar
Container: 1,2 litre
Connection:   1/4” int. thread BSP/NPT
Weight:  ~0,411 kg

Materials

Handle and trigger:   Acetal plastic
Valve:   Acetal plastic
Gaskets / O-rings:   Nitrile
Nozzles:  Hard. steel, el.galv. (145950-000), POM (145955-000)
Spring:   Hard. steel, el.galv.

drawing-sb2-02

Variants

 DescriptionArt. No.Download
SB2-145154-000_03Sodablaster 2 w/precision nozzle and 1,2 L container
NB! requires a compressor with a capacity of at least 2.5 HP / 180 l/min.
145154-000Data Sheet
User Guide
SB2-5l-soda-015 litre Soda (NaHCO3) – especially suitable for sodablasting320103-000Safety Data Sheet UK
Safety Data Sheet AUS
Safety Data Sheet E
Safety Data Sheet F
Safety Data Sheet GR
Safety Data Sheet I
Safety Data Sheet NL
Safety Data Sheet N
Safety Data Sheet S
Safety Data Sheet SF
Safety Data Sheet US
SB2-25kg-soda-0125 kg 25 kg Soda (NaHCO3) – especially suitable for sodablasting320101-000Safety Data Sheet UK
Safety Data Sheet AUS
Safety Data Sheet E
Safety Data Sheet F
Safety Data Sheet GR
Safety Data Sheet I
Safety Data Sheet NL
Safety Data Sheet N
Safety Data Sheet S
Safety Data Sheet SF
Safety Data Sheet US
SB2-precision-nozzlePrecision nozzle for 145154-000, hardened steel – el. galvanized145950-000
SB2-wide-nozzleWide nozzle for 145154-000 (3 pack), POM145955-000
143200Container 1,2 L143200
Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text.

Start typing and press Enter to search